Fixed cone
Liaoning Dapeng Heavy Equipment Manufacturing Co., Ltd. provides you with one-stop service for mining wear-resistant machinery parts. Russian Russian Russian Russian
In the cone crusher, the crushing chamber is formed by the cavity between the two lining plates: that is, the cavity between the rolling wall (fixed cone lining plate) and the crushing wall (moving cone lining plate).
Key words:
Fixed cone
Classification:
Rolled mortar wall
Hotline:
Fixed cone
In the cone crusher, the crushing chamber is formed by the cavity between the two lining plates: that is, the cavity between the rolling wall (fixed cone lining plate) and the crushing wall (moving cone lining plate). The crushing wall and the rolling mortar wall are the components that directly contact the material, and are also the main wear parts in the cone crushing plant. Liaoning Dapeng will answer questions about the service life of the crushing wall and the rolling wall of the cone-type crushing station and its influencing factors.
The crushing wall and the rolling mortar wall are the main components that work together in the cone and break the material. When the cone is broken in operation, the broken wall will move in trajectory, and the distance from the rolling wall is sometimes close and sometimes far away. The material is crushed by repeated extrusion and impact of the broken wall (moving cone) and the rolling wall (fixed cone). At this time, part of the material will be discharged from the open side discharge port. In the cone crusher, the crushing wall and the rolling block wall are the main components that directly contact the material. After a period of use, wear will inevitably occur. The crushing wall and the rolling mortar wall are important components in the conical crushing station. During the operation of the conical crushing station, attention should be paid to the materials put into the equipment to meet the crushing requirements. It is strictly forbidden to have too high hardness, too high moisture or other non-crushed materials enter the crushing cavity, otherwise it will cause the crushing wall to fall off, the equipment to shut down and other failures. At the same time, the conical crushing station should be fed evenly, and the materials should be fed in the middle of the distribution plate.
Previous Page
Next Page
Previous Page
Next Page
More products
High manganese steel has high tensile strength, plasticity and toughness and weak magnetism. Under the condition of high speed and heavy load, the working face will form a work hardening layer, which has good wear resistance. At the same time, it also has austenite. Even if the parts are worn to a very thin thickness, it can still withstand a large impact load without cracking, and will not cause secondary damage to the equipment itself.
The broken wall and rolling mortar wall of the cone on the market are generally made of high manganese steel.
Add lubricating oil during installation: when installing the crushing wall of the cone crusher, it is necessary to pour zinc alloy into the crushing wall. Before pouring zinc alloy, the crushing wall or the inner surface of the lining plate can be coated with a thin layer of lubricating oil, which can not only avoid moisture, but also increase the durability of the crushing wall and prolong the action time.
Broken wall, pricked wall is a very strong mechanical equipment, which can be carried out very well is to check its firmness before use, this will promote the efficiency of use more quickly.
Inquiry
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
Copyright©2024 Liaoning Dapeng Heavy Equipment Manufacturing Co., Ltd. All Rights Reserved
Website：300.cn jinzhou.300.cn | Privacy Policy