Casting-rolled wall
Liaoning Dapeng Heavy Equipment Manufacturing Co., Ltd. provides you with one-stop service for mining wear-resistant machinery parts. Russian Russian Russian Russian
High manganese steel has high tensile strength, plasticity and toughness and weak magnetism. Under the condition of high speed and heavy load, the working face will form a work hardening layer, which has good wear resistance. At the same time, it also has austenite. Even if the parts are worn to a very thin thickness, it can still withstand a large impact load without cracking, and will not cause secondary damage to the equipment itself.
Key words:
Casting-rolled wall
Classification:
Rolled mortar wall
Hotline:
Casting-rolled wall
High manganese steel (ZGMnl3) rolling wall
High manganese steel has high tensile strength, plasticity and toughness and weak magnetism. Under the condition of high speed and heavy load, the working face will form a work hardening layer, which has good wear resistance. At the same time, it also has austenite. Even if the parts are worn to a very thin thickness, it can still withstand a large impact load without cracking, and will not cause secondary damage to the equipment itself.
Manganese 13 Chromium 2(Mn13Cr2) Rolled wall
Using Mn13Cr2 material, while reducing the content of C and Mn in traditional high manganese steel, Cr element is added to make up for the defect of insufficient toughness of traditional high manganese steel, enhance the wear resistance of the material matrix, and effectively extend the service life of wear-resistant accessories.
Manganese 18(Mn18) rolling wall
The ultra-high manganese steel series produced by our company has determined a reasonable element ratio and optimized heat treatment process for the enterprise's R & D department after years of research and experiments. The manganese content and carbon content in the material are high,
Manganese 18 Chromium 2(Mn18Cr2) Rolled Mortar Wall
Mn18Cr2 material, for the enterprise research and development department after years of research and experiments, to determine the reasonable element ratio and optimized heat treatment process, the material manganese content and carbon content are high, after compound modification treatment, grain refinement, purification of grain boundaries, casting control solidification mode, casting high hardness, good toughness, impact resistance and wear resistance, suitable for large and medium-sized cone crusher.
Previous Page
Next Page
Previous Page
Next Page
More products
High manganese steel has high tensile strength, plasticity and toughness and weak magnetism. Under the condition of high speed and heavy load, the working face will form a work hardening layer, which has good wear resistance. At the same time, it also has austenite. Even if the parts are worn to a very thin thickness, it can still withstand a large impact load without cracking, and will not cause secondary damage to the equipment itself.
The broken wall and rolling mortar wall of the cone on the market are generally made of high manganese steel.
Add lubricating oil during installation: when installing the crushing wall of the cone crusher, it is necessary to pour zinc alloy into the crushing wall. Before pouring zinc alloy, the crushing wall or the inner surface of the lining plate can be coated with a thin layer of lubricating oil, which can not only avoid moisture, but also increase the durability of the crushing wall and prolong the action time.
Broken wall, pricked wall is a very strong mechanical equipment, which can be carried out very well is to check its firmness before use, this will promote the efficiency of use more quickly.
Inquiry
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
Copyright©2024 Liaoning Dapeng Heavy Equipment Manufacturing Co., Ltd. All Rights Reserved
Website：300.cn jinzhou.300.cn | Privacy Policy