Cone crusher-mill wall
Liaoning Dapeng Heavy Equipment Manufacturing Co., Ltd. provides you with one-stop service for mining wear-resistant machinery parts. Russian Russian Russian Russian
Cone crusher-rolling block wall is the main component that operates together with the crushing wall in the cone crusher to crush the material. It is also called fixed cone because it is fixed.
Key words:
Cone crusher-mill wall
Classification:
Rolled mortar wall
Hotline:
Cone crusher-mill wall
Cone crusher-rolling block wall is the main component that operates together with the crushing wall in the cone crusher to crush the material. It is also called fixed cone because it is fixed. When the cone is broken in operation, the broken wall will move in trajectory, and the distance between the broken wall and the rolling mortar wall will be close to and away from, so as to squeeze the broken material, and part of the material will be discharged from the open side discharge port. The rolling block wall has a fixed screw on the adjusting ring, and a special rubber for the lining plate is injected between the two to make it tightly combined. When the rolling block wall is newly installed or replaced, after 6-8 hours of work, the fastening condition should be checked and the tightening screw should be checked again. In the working process of the cone crusher, the motor drives the eccentric sleeve to rotate through the transmission device, and the moving cone rotates and swings under the movement of the eccentric sleeve. The section of the moving cone close to the fixed cone becomes the crushing cavity, and the material is subjected to the moving cone and the fixed cone. The cone is crushed by repeated squeezing and impact. When the moving cone leaves this section, the materials that have been crushed to the required particle size fall down under the action of its own gravity and are discharged from the ore discharge port. The materials to be crushed are evenly loaded into the full cavity from the feed port of the cone crusher to make the lining plate wear evenly. The rolling mortar wall produced by the company with metamorphic high manganese steel effectively prevents its wear in the crushing process and greatly prolongs its service life.
Previous Page
Next Page
Previous Page
Next Page
More products
High manganese steel has high tensile strength, plasticity and toughness and weak magnetism. Under the condition of high speed and heavy load, the working face will form a work hardening layer, which has good wear resistance. At the same time, it also has austenite. Even if the parts are worn to a very thin thickness, it can still withstand a large impact load without cracking, and will not cause secondary damage to the equipment itself.
The broken wall and rolling mortar wall of the cone on the market are generally made of high manganese steel.
Add lubricating oil during installation: when installing the crushing wall of the cone crusher, it is necessary to pour zinc alloy into the crushing wall. Before pouring zinc alloy, the crushing wall or the inner surface of the lining plate can be coated with a thin layer of lubricating oil, which can not only avoid moisture, but also increase the durability of the crushing wall and prolong the action time.
Broken wall, pricked wall is a very strong mechanical equipment, which can be carried out very well is to check its firmness before use, this will promote the efficiency of use more quickly.
Inquiry
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
Copyright©2024 Liaoning Dapeng Heavy Equipment Manufacturing Co., Ltd. All Rights Reserved
Website：300.cn jinzhou.300.cn | Privacy Policy