Cone crusher accessories-rolling wall
Liaoning Dapeng Heavy Equipment Manufacturing Co., Ltd. provides you with one-stop service for mining wear-resistant machinery parts. Russian Russian Russian Russian
Crusher is a commonly used sand making equipment in sand making production lines. Cone crusher accessories-rolling mortar wall may fail after a long period of use. At this time, we need to replace the new and rolling mortar wall. When replacing, we should first check the wear of the fixed cone, investigation ring and counterweight guard plate. If the wear is serious, we need to replace the new one and then install the liner plate.
Key words:
Cone crusher accessories-rolling wall
Classification:
Rolled mortar wall
Hotline:
Cone crusher accessories-rolling wall
Crusher is a commonly used sand making equipment in sand making production lines. Cone crusher accessories-rolling mortar wall may fail after a long period of use. At this time, we need to replace the new and rolling mortar wall. When replacing, we should first check the wear of the fixed cone, investigation ring and counterweight guard plate. If the wear is serious, we need to replace the new one and then install the liner plate.
1. Replacement of rolling mortar wall
The rolling mill wall can also be replaced directly at the crushing site. Unscrew the adjusting screw sleeve installed on the frame counterclockwise, remove the upper chamber hopper assembly, and then lift the adjusting screw sleeve with lifting equipment. After removing the adjusting screw sleeve bolt, remove the rolling mill wall for replacement. During replacement, it is necessary to clean the impurities on the outer surface, apply butter on the surface of the adjusting screw sleeve, and then install it in the opposite order.
2. Precautions for installation
The rolling wall is fixed on the adjusting ring by U-shaped screws, and the two are closely integrated by injecting zinc alloy. After 6-8 hours of work after the new installation or replacement of the rolling wall, it is necessary to check the fixation. If it is loose, re-tighten the U-shaped screw.
Previous Page
Next Page
Previous Page
Next Page
More products
High manganese steel has high tensile strength, plasticity and toughness and weak magnetism. Under the condition of high speed and heavy load, the working face will form a work hardening layer, which has good wear resistance. At the same time, it also has austenite. Even if the parts are worn to a very thin thickness, it can still withstand a large impact load without cracking, and will not cause secondary damage to the equipment itself.
The broken wall and rolling mortar wall of the cone on the market are generally made of high manganese steel.
Add lubricating oil during installation: when installing the crushing wall of the cone crusher, it is necessary to pour zinc alloy into the crushing wall. Before pouring zinc alloy, the crushing wall or the inner surface of the lining plate can be coated with a thin layer of lubricating oil, which can not only avoid moisture, but also increase the durability of the crushing wall and prolong the action time.
Broken wall, pricked wall is a very strong mechanical equipment, which can be carried out very well is to check its firmness before use, this will promote the efficiency of use more quickly.
Inquiry
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
Copyright©2024 Liaoning Dapeng Heavy Equipment Manufacturing Co., Ltd. All Rights Reserved
Website：300.cn jinzhou.300.cn | Privacy Policy