Moving cone
Liaoning Dapeng Heavy Equipment Manufacturing Co., Ltd. provides you with one-stop service for mining wear-resistant machinery parts. Russian Russian Russian Russian
The moving cone is also called the crushing wall. The crushing wall and the rolling mortar wall are the main components that work together in the cone and break the material.
Key words:
Moving cone
Classification:
Broken wall
Hotline:
Moving cone
The moving cone is also called the crushing wall. The crushing wall and the rolling mortar wall are the main components that work together in the cone and break the material. When the cone is broken in operation, the broken wall will move in trajectory, and the distance from the rolling wall is sometimes close and sometimes far away. The material is crushed by repeated extrusion and impact of the broken wall (moving cone) and the rolling wall (fixed cone). At this time, part of the material will be discharged from the open side discharge port. In the cone crushing plant, the crushing wall and the rolling mortar wall are the main components that directly contact the material. After a period of use, wear will inevitably occur. Under normal circumstances, the broken wall and the crushed wall of the cone can theoretically be used for 6 months, but it is understood that some users need to replace it after 2-3 months of use. This is due to its service life under the influence of a variety of different factors, the result of different wear conditions. During use, when the thickness of the broken wall and the rolling wall of the cone is worn to 2/3, or cracked, and the ore discharge opening is too large to be adjusted, it needs to be replaced.
Previous Page
Next Page
More products
High manganese steel has high tensile strength, plasticity and toughness and weak magnetism. Under the condition of high speed and heavy load, the working face will form a work hardening layer, which has good wear resistance. At the same time, it also has austenite. Even if the parts are worn to a very thin thickness, it can still withstand a large impact load without cracking, and will not cause secondary damage to the equipment itself.
The broken wall and rolling mortar wall of the cone on the market are generally made of high manganese steel.
Add lubricating oil during installation: when installing the crushing wall of the cone crusher, it is necessary to pour zinc alloy into the crushing wall. Before pouring zinc alloy, the crushing wall or the inner surface of the lining plate can be coated with a thin layer of lubricating oil, which can not only avoid moisture, but also increase the durability of the crushing wall and prolong the action time.
Broken wall, pricked wall is a very strong mechanical equipment, which can be carried out very well is to check its firmness before use, this will promote the efficiency of use more quickly.
Inquiry
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
Copyright©2024 Liaoning Dapeng Heavy Equipment Manufacturing Co., Ltd. All Rights Reserved
Website：300.cn jinzhou.300.cn | Privacy Policy