Dynamic cone lining plate
Liaoning Dapeng Heavy Equipment Manufacturing Co., Ltd. provides you with one-stop service for mining wear-resistant machinery parts. Russian Russian Russian Russian
The lining plate of cone crusher is divided into moving cone lining plate, also called crushing wall, and fixed cone lining plate is also called rolling mortar wall. A moving cone lining plate and a fixed cone lining plate are a set of cone crusher lining plates, which are also collectively referred to as cone tooth breaking plates.
Key words:
Dynamic cone lining plate
Classification:
Broken wall
Hotline:
Dynamic cone lining plate
The lining plate of cone crusher is divided into moving cone lining plate, also called crushing wall, and fixed cone lining plate is also called rolling mortar wall. A moving cone lining plate and a fixed cone lining plate are a set of cone crusher lining plates, which are also collectively referred to as cone tooth breaking plates.
The cone breaks the fixed cone lining plate on the moving cone lining plate. The fixed cone lining plate is fixed and does not move. The moving cone lining plate moves back and forth. The material is squeezed and crushed by the passive cone lining plate and the fixed cone lining plate. When a certain particle size is reached, it will leak out from below. The materials of the cone breaks the fixed cone lining plate and the moving cone lining plate are generally made of high steel, with Mn13,Mn13Cr2,Mn18,Mn18,Mn18Cr2 and Mn22.
Main material: high manganese steel, high quality high manganese steel, new composite materials, modified high manganese steel, new high manganese steel, ultra high manganese steel, ultra high manganese steel, metamorphic high manganese steel
Applicable materials: cone crusher is widely used in mining industry, metallurgical industry, construction industry, road construction industry, chemical industry and silicate industry, suitable for crushing hard and medium hard ore and rock, such as iron ore, limestone, copper ore, quartz, granite, sandstone, etc.
Previous Page
Next Page
Previous Page
Next Page
More products
High manganese steel has high tensile strength, plasticity and toughness and weak magnetism. Under the condition of high speed and heavy load, the working face will form a work hardening layer, which has good wear resistance. At the same time, it also has austenite. Even if the parts are worn to a very thin thickness, it can still withstand a large impact load without cracking, and will not cause secondary damage to the equipment itself.
The broken wall and rolling mortar wall of the cone on the market are generally made of high manganese steel.
Add lubricating oil during installation: when installing the crushing wall of the cone crusher, it is necessary to pour zinc alloy into the crushing wall. Before pouring zinc alloy, the crushing wall or the inner surface of the lining plate can be coated with a thin layer of lubricating oil, which can not only avoid moisture, but also increase the durability of the crushing wall and prolong the action time.
Broken wall, pricked wall is a very strong mechanical equipment, which can be carried out very well is to check its firmness before use, this will promote the efficiency of use more quickly.
Inquiry
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
Copyright©2024 Liaoning Dapeng Heavy Equipment Manufacturing Co., Ltd. All Rights Reserved
Website：300.cn jinzhou.300.cn | Privacy Policy